LDC Racing Saliboats RS FEVA Owner's Manual page 44

Untie the gennaker downhaul
disappear up the
5) With the gennaker
gennaker downhaul
the inside to outside (see picture 4.31).
6) Run the gennaker downhaul line
gennaker downhaul
through it. Place the
the end of the downhaul, and tie it in place with a single overhand knot. Tie
the end of the
using a bowline
come all the way down, shorten the distance between the bobble and the
patch.
line, taking care not to let go of it, as it will
gennaker chute!
on the port-hand side of the boat, pass the end of the
through the small eyelet in the centre of the gennaker, from
bobble from the rope pack and thread the
gennaker downhaul
gennaker downhaul
(see picture 4.32). if you find that the gennaker does not
Picture 4.30 The Tack of the Gennaker
Picture 4.31 Threading the Gennaker Downhaul Line
up the outside of the gennaker. Take the
bobble approximately 20 mm from
onto the upper patch (cross of webbing)
downhaul
Knot in Tack Line