Pullback Printing (Metallic Silver/Cmyk  White) - Roland XC-540MT Manual To Installing

Pullback printing (Metallic silver/CMYK  White)
This section describes how to perform printing in the sequence of metallic silver/CMYK Color and then white.
After performing printing using metallic silver and CMYK ink and allowing the ink to dry for predetermined
period, the media is pulled back once, and then the fill overprinting is performed using white ink.
The printing data containing metallic colors such as "RDG_MetallicSilver" and "RVW-MT-Bronze" must be used
in order to use the metallic silver ink, and the printing data containing "RDG_WHITE" must be used in order
to use the white ink.
 P. 12, "Creating Printing Data"
This printing method involves some important notes for avoiding contamination on the printed
surface. Be sure to refer to page 6, "When Performing Pullback Printing".
Image of overprinting in the sequence of metallic silver/CMYK and then white.
Transparent media
1.
Printing With Metallic Silver/CMYK Color

Make sure that you have finished making the preparations for VersaWorks, creating the
printing data, and getting the printer ready ( p. 9, "Chapter 2 Getting Ready").

You will have the
printed image from this
side (the opposite side
of the printed surface
of the finished results).
Metallic Silver / CMYK
White
Double-click
"Queue A Properties" window appears.
4-1 Pullback printing
.
Chapter 4 Advanced
49