Layered Print (Cmyk  Metallic Silver ) - Roland XC-540MT Manual To Installing

3-1 Print Job Setting
Layered Print (CMYK  Metallic Silver )
This section describes how to perform the layered print with the metallic silver ink.
 P. 18, "Blend Print and Layered Print (Metallic Silver and CMYK)"
To perform the layered print, you need to use the printing data where the use of the metallic silver ink and
the CMYK ink is designated.
 P. 12, "2-3 Creating Printing Data"
Procedure

Make sure that you have finished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( page 9, "Chapter 2 -- Getting Ready").


28
Chapter 3 Printing
Double-click .
Queue A Properties" window appears.
Click .
For [Media Type], select "xxx[MT]: Clear
PET Film" or "xxx[MT]: PET Clear Film,
Adhesive" (or xxx: Clear PET Film," "xxx:
PET Clear Film, Adhesive).
* "xxx" indicates "ESP-CL" and others.
For [Print Quality], select [High Quality
(Layerd)].
For [Mode], select [CMYK -> Mt (v)].