Roland XC-540MT Manual To Installing page 59

2.
Create Illustrations and Specify Texture Patterns You Wish to Use

Create the illustration.
Be sure to draw the illustration in the CMYK mode.

Assign the desired texture patterns to the areas for the texture printing.
The areas where the texture patterns are assigned shall be printed with metallic silver ink. When the
metallic silver ink is to be used for the printings other than the texture printing, other special spot colors
shall be used. For the detailed usage, please refer to "Chapter 2 Getting Ready".
* The name of the texture pattern is displayed on the data of Illustrator. The texture of the displayed image
appears rougher than that of the actual print.
The area to be printed with the texture pattern
 From " Roland Metallic Texture System
Library," specify the texture pattern such as
"RTSL-MT-Standard-020."
4-2 Performing Texture Printing
Chapter 4 Advanced
57