Roland XC-540MT Manual To Installing page 41


When printing a Metallic Color Chart, the [Quality] settings from the [Queue Properties] window are
always applied. Since you cannot change the quality settings for the job using the [Job Settings]
window after it has been added, be sure to configure the settings in the [Queue Properties] window
before performing the following operations.


3-2 Starting the Print Operation
Click , configure the settings in [Quality-
Settings] and [Color Management].
 P. 22, "3-1 Print Job Setting"
Click [OK].
Click [Media] and then [Metallic Color
Chart].
Check the page size.
If the size of the media loaded on the printer is not
adequate for the page size, change it to another
media of sufficient size.
Click [OK].
The print job of the Metallic Color Chart is added to
the job list.
Click .
Printing will be started.
Chapter 3 Printing
39