AT&T CL83113 User Manual page 50

Telephone operation
Options while on calls
To transfer an outside call from the telephone base:
1. During the call, press MENU/
/�ELECT to choose Transfer.
2. Press
MENU
• If your have one handset, the outside call is put on
hold and the telephone base shows
Transferring call... The handset rings and shows
Transfer from BA�E 0
base name).
• If you have more than one handset, the telephone
base shows TRAN�FER TO: Use the dialing keys to
enter a specific handset number (1-9 for handsets
1-9, TONE followed by 0-2 for handsets
10-12, or TONE followed by # for all handsets),
or press q
handset and press
the telephone base shows Transferring call... or Transferring call to
all... The other handset(s) rings and shows Transfer from BA�E 0
represents the base name).
3. To answer the call on the destination handset, press
/��EA�ER ��EA�ER. The telephone base shows Call transferred and goes to
idle mode.
NOTES:
• To cancel the transfer and return to the external call before the blind transfer call is answered,
press /CANCEL,
OFF
/��EA�ER ��EA�ER on your telephone base.
• If the other device does not answer the transfer within 30 seconds, the transfer ends and the
initiating device rings while showing No response to transfer. If it does not pick up within 30
seconds, the device returns to idle mode and the outside call ends.
(BA�E represents the
or p to scroll to the desired
CID DIR
/�ELECT.
MENU
�HONE/
FLA�H
.
�ELECT
The outside call is put on hold and
or /��EA�ER ��EA�ER on your handset, or CANCEL or
44
Speaker
8/06
> T r a n s f e r
I n t e r c o m
TRANSFER TO:
> H a n d s e t
, press �HONE/
0:00:12
6:30
AM
p
q
2
p
q
(BA�E
or
FLA�H