Front And Rear Panel Description - Krell Industries S–150m Instructions For Use Manual

Front and Rear Panel Description

See Figures 3 and 4 on page 6 and 7
Krell S-150m
1 Power Button
Use this button to switch the S-150m between the stand-by and
the operational modes.
2 Stand-by Indicator
The red stand-by indicator illuminates when the S-150m is plugged
into a standard AC wall receptacle and the rear panel power but-
ton is pressed, indicating that the amplifier is in the stand-by mode
and ready to be switched to the operational mode. The indicator
turns blue when in operational mode
The S-150m back panel provides connections for all inputs and
outputs, power on/off, and additional remote connections.
3 Input Switch
Set this switch for the style of connection being used,
balanced/XLR or single-ended/RCA.
4 Balanced Analog Input
The S-150m is equipped with one balanced input via XLR connec-
tor.
5 Single-Ended Analog Inpus
The S-150m is equipped with one single-ended input via RCA con-
nector.
Consult the owner's reference of the components used in a custom instal-
lation to take full advantage of the remote capability of the S-150m.
8