Unpacking
Open the box and remove the top layer of foam. You see these items:
1 Home Theater Standard
1 IEC connector (AC power) cord
1 Home Theater Standard handheld remote control -
2 AAA-size 1.5 Volt batteries
1 T-15 Torx wrench ~small "U' type)
1.T-10 Torx wrench (small "L" type)
2 12 VDC output (12 V trigger) cables
1 packet containing the owner's reference manual, the RS-232 Port developer's
reference, the "read this first" insert, and the warranty registration card
Carefully remove the unit and accessories from the box. Remove the foam end caps
and protective plastic wrap from the unit.
Note
Save all packing materials./f you must ship your Home Theater Standard in the future,
repack the un# in its original packaging to prevent transit damage. See Return
Authorization Procedure, on page 55.
2
Krell Home Theater Standard