Table of Contents
Advertisement
Use the 1" ,], keys (80) to select the desired trigger mode and press enter (83) to select.
You return to the CONFIGURE
12 VTRIGGER
screen, which now reflects the change you
just entered.
Adjust Trigger
Delay
On the CONFIGURE
12 V TRIGGER
scree.n, use the ~ key to move the blinking cursor to
DELAY
and press enter (83). Use the 1" ,I, keys (80) to increase or decrease the number
of seconds (range is from 0 to 30).
When desired triggeP ~node and trigger delays areset-for all triggers, select OK in the
CONFIGURE
12 V TRIGGER
screen, and press enter (83) to return to the CONFIGURE
DEVICES
screen.
Configuring Additional
Inputs
The screen process above uses DVD as the selected device. For any of the other
devices available (LD,
SAT, VGR1, TV, CD, TONER, AUX1, AUX2, TAPE), use
the same
process.
When all devices have been selected and configured, select OK on the CONFIGURE
DEVICES
screen and press enter (83). You return to the SELECT DEVICE screen. Select
and press enter (83) to return to the main menu.
5.
CONFIGURE LEVEL ADJUSTMENT
The fifth main menu option, CONFIGURE
LEVEL ADJUSTMENT,
allows you to. set trims. Trims
add a fixed positive or negative volume offset for devices Or modes with significantly
different volume levels. After adjusting volume trim, you can easily switch between
these inputs or modes without experiencing excessive changes in volume levels.
KRELL HTS
-MAIN MENU-
CONFIGURE SPEAKERS
LISTENING ROOM SETUP
CALIBRATE VOLUME
CONFIGURE DEVICES
CONFIGURELEVEL ADJUSTMENT
OPERATION
36
Krell Home Theater Standard
Advertisement
Table of Contents
