Connect Amplifier(S) - Krell Industries None Instructions For Use Manual

Connecting the Home Theater Standard to Your System, continued
The Home Theater Standard is also equipped with four S-video inputs and four
composite video inputs. S-video cables transmit the color and luminance components of
the video signal separately. The comb filter within the source unit performs this
separation. If the source's comb filter is superior to the one within the video monitor, use
the S-video connections, Otherwise, use composite videoinput.
The Home Theater Standard is equipped with two S-video outputs, two composite video
outputs, and one set of component video outputs. One. S-video output, one composite,
video output, and the component video output include on-screen display. For dubbing
purposes, only the output labeled OSD displays on-screen information.
Note
The Home Theater Standard does not. convert video signal formats, Le., an S-video
input signal is output as an S-video signal The same is true for composite and
component video signals.
CONNECT AMPLIFIER(S)
Connect the outputs of the Home Theater Standard to the input(s) of your power
amplifier(s).
The Home Theater Standard has balanced outputs with XLR connectors and single-
ended outputs with RCA connectors. Both outputs are active at all times, allowing
simultaneous connection to separate amplifiers. Only one of these output formats
should be connected to a single amplifier. Use the DB-25 connector to connect to a
DB-25-equipped amplifier.
22
Krell Home Theater Standard