Listening Room Setup - Krell Industries None Instructions For Use Manual

After selecting the appropriate option for your speakers, press enter (83), highlight oK,
and press enter (83).again. You return to the speaker system setup menu. The on-
screen phrase for the selected speaker now reads LIMITED or
FULL-RANGE.
2. LISTENING ROOM SETUP
--
The second main menu screen, the listening room setup, allows you to tell the Home
Theater Standard the exact location of each speaker in your system, so that the Home
Theater Standard can calculate the pr.oper arrival and delay settings.
KNELL HTS
-MAIN MENU-
GONFIGURE SPEAKERS
¯
LISTENING ROOM SETUP ~
CALIBRATE VOLUME
CONFIGURE DEVICES
CONFIGURE LEVEL ADJUSTMENT
OPERATION
Use the 1" $ keys (80) to highlight LISTENING ROOM SETUP and press enter (83).
LISTENING ROOM SETUP
screen appears:
KNELL HTS
-LISTENING ROOM SETUP-
LEFT
CENTER RIGHT
~0FT~ OFT OFT
L REAR SUB R REAR
OFT OFT OFT
When you access the LISTENING ROOM SETUP screen, the cursor is blinking at the LEFT
speaker. Press enter (83), then use the 1" key (80) to increase the number to the correct
distance (in feet, up to 30 feet) from the main listening position to the left speaker. Press
enter (83) again to set the selection.
Use the ~ directional key (80) to highlight the 0 FT under CENTER. Press enter (83).
the same procedure to input the correct distance for the center speaker. Press enter
(83) again to set the selection.
Do the same for the remaining speakers in the system. After all the distances are set,
press the previous key (78) to return to the main menu.
Krell Home Theater Standard
27