4 Replacement Procedures
4.11 Display Assembly
Removing the Display Assembly
Remove the display assembly according to the following procedures and Figures 4-20.
1. Open the display panel at an angle of 90 degrees.
2. Turn the computer upside down.
3. Remove four M2.5x6 black flat head screws securing the LCD module to the top
cover.
Display assembly
4--32
M2 5x6 0 black flat head screw
.
.
Figure 4-20 Removing the display assembly
Satellit /Satellite Pro /C850D/C855D /L850D/L855D Maintenance Manual
4.11 Display Mask