4.6 Keyboard
4.6
Keyboard
Removing Keyboard
Remove the Keyboard according to the following procedures and Figure 4-8.
1. Insert your finger in top cover left hold and Push keyboard corner, so let keyboard
corner pops up.
2. Release the following 14 latches on the keyboard cover, in that order:
- Six bottom latches, (The leftmost latch first, by the Sequence to the rightmost.)
- One latch on right side and one latch on left sides
- Six front latches.
3. Disconnect the keyboard cable from CN250 on the system board.
4. Remove the keyboard.
NOTE: In case of keyboard is difficult to remove, please utilize proper tool to release
latch instead of pulling the keyboard out violently.
Satellit /Satellite Pro /C850D/C855D /L850D/L855D
Latch
Push
CN250
Figure 4-8 Removing the keyboard
4 Replacement Procedures
Keyboard
Maintenance Manual 4-19