Connecting A Powered Subwoofer; Connecting An Audio Playback Device; Connecting A Tv; Connecting The Power Cord - Onkyo CS-345 Instruction Manual

Connecting Other Components
About Connections
• Before making any connections, read the manuals
supplied with your other components.
• Don't connect the power cord until you've completed
and double-checked all connections.
Connection Color Coding
RCA-type audio connections are usually color-coded:
red and white. Use red plugs to connect right-channel
audio inputs and outputs (typically labeled "R"). Use
white plugs to connect left-channel audio inputs and
outputs (typically labeled "L").
Push plugs in all the way to make
good connections (loose connections
can cause noise or malfunctions).
Note:
• Do not put anything on top of the CD receiver, as it
may interfere with proper ventilation.
16
Downloaded From Disc-Player.com Onkyo Manuals
En-
—Continued

Connecting a Powered Subwoofer

Using a suitable cable, connect the CD receiver's
AUDIO OUT: SUBWOOFER to the input on your
powered subwoofer.
If your subwoofer is unpowered and you're using an
external amplifier, connect the AUDIO OUT:
SUBWOOFER to the amp's input.
Note:
• Do not connect or disconnect the power cord while the
subwoofer is powered-on. Doing so may damage the
subwoofer. You must power-off the subwoofer before
connecting or disconnecting the power cord.
Right!
Connecting an Audio Playback
Device
Using a suitable cable, connect the CD receiver's LINE
Wrong!
IN jacks to the OUTPUT (PLAY) jacks of your cassette
tape deck, TV, or other audio playback device.

Connecting a TV

If you want to view the contents of videos from your
iPod/iPhone on your TV, connect the CD receiver's
VIDEO OUT jack to the VIDEO IN jack of your TV or
projector.

Connecting the Power Cord

Connect the CD receiver's power cord to a suitable wall
outlet.
Notes:
• Do not use any cord other than the included power
cord.
Do not connect the included power cord to any other
device. Doing so may cause malfunctions or
accidents.
• Do not unplug the power cord from the AC INLET
while the other end of the cord is still connected to an
AC outlet. You may receive an electric shock if you
accidentally touch the internal terminals of the power
cord.
• Before connecting the power cord, connect all of your
speakers and AV components.
• Turning on the CD receiver may cause a momentary
power surge that might interfere with other electrical
equipment on the same circuit. If this is a problem,
plug the receiver into a different branch circuit.
• Plug the power cord into an AC outlet that is easily
accessible so that you can quickly unplug it if
necessary.