Table of Contents
Advertisement
To use this destination entry method by selecting a
category, do the following:
1. Touch the Category screen button from the POINT
OF INTEREST screen to view a list of POI
categories.
2. Choose a category, and then a sub-category.
3. The Navigation System will display available POIs
names in the selected sub-category or if the list is
too long the system will display the alpha keypad.
4. If the alpha keypad is displayed, input the POI name
until a list of available POIs appears. You may also
select the List screen button when it becomes
available.
5. Select the POI from the list.
A map screen will then appear with the destination
marked.
2-10
To use this destination entry method by selecting a city,
do the following:
1. Select the city screen button, then choose from Any
City, 5 Nearest Cities, Input City Name or from the
Last 5 Cities list. If you choose Any City, the system
will return to the name POI input method/screen. If
you choose 5 Nearest Cities, the system will
generate a list of the five nearest cities to your
current position. Or you can select from the last five
cities that were used. If you choose to input the city
name the system will display the alpha keypad.
2. Input the city name using the alpha keypad.
3. Select the desired city from the list displayed.
4. Use the alpha keypad to enter the POI name.
Touch Sym. to view a list of symbols to add
when entering a POI, touch Others to view a list of
special characters you can choose from, or
touch A - Z to return to the alpha keypad.
5. A list of POIs will appear if there are fewer than five
POIs found using the information from the alpha
keypad input. You may also touch the List button at
any time to view available POIs.
6. Select the desired POI from the list.
A map screen will then appear with the destination
marked.
See "Getting Started on Your Route" later in this section
for more information.
Advertisement
Table of Contents
