Table of Contents
Advertisement
Store Exit Settings: This feature allows you to store
exit positions for the seat and steering column.
To store exit settings using the Navigation System, use
the following procedure:
1. Select the CONFIG hard key.
2. Select the Vehicle screen button.
3. Select the Memory screen button.
4. Adjust your settings for the driver's seat and the
steering column to a comfortable exit position.
5. Select the Store Exit Driver Settings screen button.
Two beeps will sound to confirm that your new exit
settings are saved.
6. Repeat this procedure for a second driver by
programming the other driver number.
Recall Exit Settings: This screen button allows you to
recall the seat and steering column to the appropriate
exit positions.
To recall exit settings using the Navigation System, use
the following procedure:
1. Select the CONFIG hard key.
2. Select the Vehicle screen button.
3. Select the Memory screen button.
4. Select the Recall Exit Settings screen button to
recall your previously stored exit settings.
5-14
If the vehicle is in PARK (P), a beep will sound and your
previously saved exit position will then be recalled. If
the vehicle is not in PARK (P), three beeps will
sound and your previously saved exit position will not
be recalled.
A memory recall can be stopped by pressing any memory
seat or mirror position button. If you would like the stored
exit positions to be recalled when your vehicle is in
PARK (P), the vehicle is off, and the driver's door is
opened, see "Occupant Position" earlier in this section.
Memory Infotainment Settings and Presets
These settings and presets are set automatically.
They include the following:
•
Radio presets
•
Navigation
•
Address Book
•
Language
•
HUD display
•
Climate control settings
For more information, see each item in the index.
Advertisement
Table of Contents
