Cadillac 2005 STS Navigation System User Manual page 125

Hide thumbs Also See for 2005 STS Navigation System:
Table of Contents

Advertisement

Recall Driver Settings: Touch this screen button to
have your previously stored seat, steering column,
outside mirror, climate control and radio positions
recalled.
To recall driver settings using the Navigation System,
use the following procedure:
1. Select the CONFIG hard key.
2. Select the Vehicle screen button.
3. Select the Memory screen button.
4. Select the Recall Driver Setting screen button to
recall your previously stored settings.
If the vehicle is in PARK (P), a beep will sound and your
previously saved driving position will then be recalled.
If the vehicle is not in PARK (P), three beeps will sound
and your previously saved driving position will not be
recalled.
A memory recall can be stopped by pressing any
memory seat or mirror position button. If you would like
the stored driving positions to be recalled when
unlocking your vehicle with the keyless access
transmitter or when starting your vehicle, see "Occupant
Position" earlier in this section.
Store Driver Settings: This feature allows you to store
the seat, steering column, and outside mirrors
positions.
To store driver settings, using the Navigation System,
use the following procedure:
1. Select the CONFIG hard key.
2. Select the Vehicle screen button.
3. Select the Memory screen button.
4. Select the Store Settings screen button.
5. Adjust your settings for the driver's seat, the outside
mirrors, and the steering column to a comfortable
driving position.
6. Select the Store Driver Settings screen button. A
beep will sound to confirm that the driver settings
are stored.
7. Repeat this procedure for a second driver by
programming the other driver number.
Your memory settings are now programmed. Any
changes that are made to the HUD, Navigation System,
and climate controls while driving will be automatically
stored when then ignition is turned off.
Driver Select: Change which driver is active by
touching this screen button. The numbers on the back
of the keyless access transmitters correspond to
the driver number.
5-13

Advertisement

Table of Contents
loading

Table of Contents