Duplicating A Video Tape - Toshiba SD-V594SC Owners Manualyamna

Duplicating a video tape

If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate
a previously recorded tape. Make all connections before turning on the power.
Duplicating a video tape
Preparation:
• Turn ON the TV and select the corresponding video
input.
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
(The VCR indicator will light.)
• Load a cassette tape with the erase prevention tab
intact.
• Load a previously recorded tape into the playback
VCR or Camcorder.
1
Press SP/SLP to select the desired tape speed
SP or SLP.
2
Press INPUT SELECT once or twice to select
AUDIO/VIDEO input position.
3
Press PLAY on the playback VCR or Camcorder.
4 Press REC/OTR on the recording VCR.
5
Press STOP when you finish duplicating.
2I40301A-En_p44-47
Downloaded From Disc-Player.com Toshiba Manuals
It is recommended to set the tape
speed to the SP mode on the
recording VCR for best results.
"L1" or "L2" will appear in the display.
L1: on the rear panel
L2: on the front panel
The duplicating process begins.
45
Connection with second VCR
Playback VCR
To VIDEO OUT
AUDIO/VIDEO cable (supplied)
Recording VCR
To AUDIO (R) IN
To VIDEO IN
To AUDIO (L) IN
Connection with Camcorder
Playback Camcorder
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
AUDIO/VIDEO cable (not supplied)
To VIDEO IN
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup is
shown above.
21/3/06, 9:44 AM
DVD/VCR
INPUT SELECT
STOP
SP/SLP
DVD/VCR SELECT
REC/OTR
To AUDIO (R) OUT
To AUDIO (L) OUT
To AV Jack
45