Table of Contents
Advertisement
Recording (VCR)
Timer recording
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
Timer recording
Preparation:
• Press DVD/VCR to operate the DVD/VCR.
• Press DVD/VCR SELECT to select the VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct
Example: Program a timer recording for the 26th day,
channel 125 (Cable TV), 11:00 - 11:30 PM on timer
program number 1 (Tape speed: SLP).
1
2
3
4
Notes:
• Press CANCEL to move cursor backward for correction.
• To record from external source set the channel to "L1" or
"L2".
42
2I40301A-En_p40-43
Downloaded From Disc-Player.com Toshiba Manuals
Press VCR MENU. Select "TIMER REC SET",
then press ENTER.
MENU
TIMER REC SET
AUTO REPEAT
SAP
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
Press SET + or – to select one of the program
line, then press ENTER.
DATE
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
+/Ð/ENTER/CANCEL/MENU
〈
Press SET + or – to select the date, then press
ENTER.
DATE
26(SA)
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
+/Ð/ENTER/CANCEL/MENU
〈
Set the start time, end time, channel and tape
speed as in step 3.
DATE
26(SA) 11:00
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
+/Ð/ENTER/CANCEL/MENU
〈
42
5
To enter other programs, repeat steps 2
through 4.
'
.
6
Press TIMER REC. The timer symbol (
ON
OFF
ON
OFF
appear on the display and the VCR standbys
for recording.
START END
CH
Notes:
Ð : Ð Ð Ð Ð Ð
Ð
Ð : Ð Ð Ð Ð Ð
Ð
• The timer recording will start at 5 seconds before the
Ð : Ð Ð Ð Ð Ð
Ð
preset starting time.
Ð : Ð Ð Ð Ð Ð
Ð
Ð : Ð Ð Ð Ð Ð
Ð
• If the timer symbol (
Ð : Ð Ð Ð Ð Ð
Ð
Ð : Ð Ð Ð Ð Ð
Ð
when TIMER REC is pressed, the cassette is not inserted
Ð : Ð Ð Ð Ð Ð
Ð
.
〉
34
• If the cassette is ejected when TIMER REC is pressed, the
erase prevention tab of the cassette may have been
removed
34
• During Timer recording, the power cannot be turned off.
START END
CH
Ð : Ð Ð
Ð : Ð Ð Ð Ð Ð
Ð
Ð : Ð Ð Ð Ð Ð
Ð
Notes:
Ð : Ð Ð Ð Ð Ð
Ð
Ð : Ð Ð Ð Ð Ð
Ð
• If the timer symbol (
Ð : Ð Ð Ð Ð Ð
Ð
Ð : Ð Ð Ð Ð Ð
Ð
the TV program has not been completely recorded because of
Ð : Ð Ð Ð Ð Ð
Ð
an insufficient tape length. Press TIMER REC to cancel the
Ð : Ð Ð Ð Ð Ð
Ð
〉
timer program or press EJECT to remove the cassette tape.
• During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, first press TIMER REC then press
DVD/VCR SELECT to change to VCR mode. After VCR mode
is selected, press TIMER REC again to put the VCR into timer
recording standby mode.
START END
CH
11:30
125
• If you press TIMER REC during timer recording, the recording
PM
PM
SLP
Ð : Ð Ð Ð Ð Ð
Ð
Ð : Ð Ð Ð Ð Ð
Ð
operation will be interrupted. If you press TIMER REC again
Ð : Ð Ð Ð Ð Ð
Ð
within the programmed time, the recording operation will start
Ð : Ð Ð Ð Ð Ð
Ð
Ð : Ð Ð Ð Ð Ð
Ð
again.
Ð : Ð Ð Ð Ð Ð
Ð
Ð : Ð Ð Ð Ð Ð
Ð
• After a power failure or disconnection of the power plug, all
〉
programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock
reprogram any timer recording.
DVD/VCR
SET +/–
ENTER
CANCEL
VCR MENU
EJECT
DVD/VCR SELECT
TIMER REC
• To return to the normal screen,
press VCR MENU twice.
DATE
START END
26(SA) 11:00
11:30
PM
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð : Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð : Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð : Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð : Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð : Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð : Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð
Ð : Ð Ð Ð Ð Ð
+/Ð/ENTER/CANCEL/MENU
〈
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode.
If you do not use the DVD, turn the
power off.
) does not appear on the display
.
) blinks when the timer recording ended,
21/3/06, 9:44 AM
CH
125
PM
SLP
Ð
Ð
Ð
Ð
Ð
Ð
Ð
〉
) will
'
and
Advertisement
Table of Contents
