Setting For Recording On A Dvd-R/Rw Disc In Video Mode - Toshiba RD-XS24SB Owner's Manual

Recording
Initializing a disc (Continued)

Setting for recording on a DVD-R/RW disc in Video mode

Video mode recording enables playback of your favorite contents on other devices such as DVD players.
Finish this setting beforehand if you make a Video mode recording, that is;
- when you record on a DVD-R/RW (Video mode).
- when you record contents which will be copied from the HDD to a DVD-R/RW (Video mode).
Items to set up
When recording in Video mode, there are some
restrictions by DVD-Video standard.
Therefore, it is necessary to set up these items below.
Set up the items in advance before copying contents
from the HDD to a DVD-R/RW (Video mode) disc.
DVD compatible mode
Only the left channel sound and the right channel
sound are available for recording in Video mode
under DVD-R/RW standard.
Off:
On (Mode I): In multichannel broadcasting, only
On (Mode II): In multichannel broadcasting, only
Aspect ratio (Video mode)
"4:3" and "16:9" cannot be mixed in one title.
Therefore, set the aspect ratio before recording.
4:3: Set the aspect ratio to 4:3
16:9: Set the aspect ratio to 16:9
DVD-Video: CHP create
This is the setting to divide a title into some
chapters. It is convenient to skip scenes.
Off:
5 min, 10 min, 15 min, 20 min:
Select an interval for chapter dividing.
Note
• When the number of chapters reaches a limit, chapters
are not divided anymore. The limit number of chapters is
dependent on conditions of a DVD-R/RW disc.
Note
• This setting is not effective in dubbing.
28
RD-XS24SB_Ope_E_p025-036
Downloaded From Disc-Player.com Toshiba Manuals
This is not for recording on a DVD-R/
RW disc.Depending on Picture/Audio
settings, making DVD Video may not
be possible. (When recording directly
on a DVD-R/RW disc of DVD-Video
mode, the recording proceeds with
"On (Mode I)" on even though "Off" is
set.)
the left channel sound is recorded.
the right channel sound is recorded.
Chapter dividing is not available.
28
How to set up
1
Press SETUP during stop.
SETUP menu appears.
SETUP
2
Select "DVD recorder operation"
and press ENTER.
e.g.
DVD recorder operation
ENTER
AV record quality
Picture record mode
DVD-RW rec. mode setting
Video mode rec. setting
Relief recording
3
Select "Video mode rec.
setting" and press ENTER.
e.g.
DVD recorder operation
ENTER
AV record quality
Picture record mode
DVD-RW rec. mode setting
Video mode rec. setting
Relief recording
4
Press / to select an item
then press / change the
setting, and finally press
ENTER.
e.g.
ENTER
8/31/05, 11:52 PM
Video mode
On
SETUP
Video mode
On
SETUP