4-1B: Amp Level; 4-1C: Pan; 4-8: Eq - Korg M3 Owner's Manual

Pickup: This simulates an electromagnetic pickup. Depth
adjusts the depth.
Depth: 000 Depth: 064
Note: The above illustration for Pickup shows differences in
the output waveform when a sine wave at C4 is input. The
transformation will vary depending on the input pitch.
Level Boost: Boosts the output level. Depth adjusts the
amount of boost.
Depth: 000 Depth: 064
This may produce high output volumes than other
wave shape types.
4–1b: Amp Level
Amp Level
This controls the basic volume level of Oscillator 1, before
keyboard tracking, velocity, and other modulation.
Punch Level
Creates a more "snappy" attack by adjusting the amount of
pulse waveform that is added to the oscillator output only
during the attack. Increasing this value will emphasize the
attack.
If the attack is slowed down by the EG etc., this will
have no effect.
Keyboard Track
Specifies how keyboard tracking will affect the volume.
With positive (+) settings, the volume will increase as you
play upward from the C4 key, and decrease as you play
downward.
With negative (–) settings, the volume will decrease as you
play upward from the C4 key, and increase as you play
downward.
If this value is 0, keyboard tracking will not affect the
volume.
Note: Keyboard tracking works according to the pitch as
controlled by pitch bend, transpose, and modulation
sequencer. It does not reflect pitch changes produced by
vibrato or virtual patching.
4–1c: Pan
Pan
This controls the stereo pan of RADIAS oscillator. A setting
of L001 places the sound at the far left, C064 in the center,
and R127 to the far right.
Depth: 127
Depth: 127
[000...127]
[000...127]
[–63...+63]
[L000...C064...R127]
4–8: EQ
Here you can make the Mid sweep EQ settings.
For details on the available parameters and menu
commands, please see "4–8: EQ" on page 65 of the M3
parameter guide.
PROG P4: Amp/EQ 4–8: EQ
37