Tone Adjust Default Settings - Korg M3 Owner's Manual

Parameter guide
MSEQ Resolution ( 3... , Absolute):
Controls the playback speed of the modulation sequence as
a timing resolution relative to the tempo.

Tone Adjust Default Settings

Tone Adjust provides an elegant physical interface to the
parameters. Most of the factory sounds use the default
layout, as shown above. You can also customize the layout
for individual sounds, if desired.
For more information about Tone Adjust, please see "0–8g:
Tone Adjust" on page 21 of the M3 parameter guide.
RADIAS Tone Adjust parameters
The EXB-RADIAS supports all of the Common Tone Adjust
parameters, as described under "Common Tone Adjust
Parameters," on page 22. It also adds a number of its own
original RADIAS Tone Adjust parameters.
RADIAS Tone Adjust default Settings
[OSC1] [OSC2]
Level Level
[OSC1]
Mod
[OSC1]
Control2
[OSC1] [OSC2]
Control1 Semitone
24
Drive/
Unison
WS Depth
[OSC2] Filter Mod Seq
Mod Resonance Sw
[OSC2] F/A EG F/A EG
Tune Decay Time Release Time
F/A EG F/A EG
Attack Time Sustain Level