Winnebago Journey Owner's Manual page 28

SECTION 2
DRIVING YOUR MOTOR HOME
Power Mirror Controls
Select the mirror to be adjusted by pushing the
switch in the middle of the control to the right or
left. Then press the arrow buttons as necessary to
obtain the best view.
When mirrors are adjusted to preference,
place the selector switch back in the middle posi-
tion to cancel power to the buttons. This prevents
accidental misadjustment of mirror settings.
The mirrors also contain heating elements to
defog or de-ice the mirror glass during cold
weather operation. An ON-OFF switch for the
mirror heaters is located near the remote mirror
controls.
Mirror
Heat
Switch
Mirror
Adjustment
Control
Mirror Selector Switch:
Left for left mirror,
right for right mirror,
center off
If you cannot adjust the mirror properly using
the control switch, the mirror may need a coarse
adjustment by repositioning the mirror head. See
the mirror manufacturer's instructions in your
Owner InfoCase.
2-8
Driver Side Mirror
Loosen screw to make coarse adjustment
Passenger Side Mirror
Loosen screws to make coarse adjustments
More Info
To read more about power mirrors, see the
mirror manufacturer's information in your Own-
er InfoCase.
Lock Screw
Lock Screws