Using The Zoom Rockers, Wireless Controller Or Optional Remote Control - Canon XF300 Instruction Manual

Zooming
Using the Zoom Rockers, Wireless Controller or
Optional Remote Control
When you operate the zoom, a zoom indicator* will appear on the screen
that shows the approximate zoom position. To use the zoom rockers,
make sure to set the ZOOM switch to ROCKER in advance.
* You can use the [J Other Functions]
setting (0 122) to set the zoom indicator to a numerical display.
Using the Grip Zoom Rocker
Use the functions in the [l Camera Setup]
the zoom speed. When you select a constant zoom speed, set one of 16
constant speeds (1 is the slowest, 16 the fastest). With a variable zoom
speed, press gently for a slow zoom; press harder for faster zooms.
Move the zoom rocker toward
P
toward to zoom in (telephoto).
Setting the Zoom Speed
Refer to the following table for approximate zoom speeds of the entire
zoom range (end to end).
1 Open the zoom [Speed Level] submenu.
[l Camera Setup]
2 Select [Fast], [Normal] or [Slow] and then press SET.
3 Open the [Grip Rocker] submenu.
[l Camera Setup]
4 Select [Constant] or [Variable] and then press SET.
To set the speed level for [Constant]
5 Open the grip rocker [Constant Speed] submenu.
[l Camera Setup]
6 Select the desired level and then press SET.
[Custom Function]
[Zoom] submenus to set
Q
to zoom out (wide-angle) and
[Zoom] [Speed Level]
[Zoom] [Grip Rocker]
[Zoom] [Constant Speed]
[Zoom Indicator]
Recording
[l Camera Setup]
[Zoom]
[Speed Level]
[Normal]
[l Camera Setup]
[Zoom]
[Grip Rocker]
[Variable]
[l Camera Setup]
[Zoom]
[Constant Speed 8]
3
75