Checking The Status Of The Cf Card Slots; Removing A Cf Card - Canon XF300 Instruction Manual

Preparations
2
38
Preparing Recording Media

Checking the Status of the CF Card Slots

You can check the status of the CF card slots immediately by looking at
the CFj/CFl access indicator. Refer to the following table.
Access indicator color
Red
Green
Indicator off

Removing a CF card

1 Wait until the access indicator for the card slot with the CF card
to be removed is off.
2 Slide the CF card slot cover switch in the direction of the
E mark ( ).
• The CF card slot cover will open upward (slot A) or downward
(slot B).
3 Push the CF card release button ( ).
• The release button partially pops out.
4 Push in the CF card release button to release the CF card ( ).
5 Pull the CF card all the way out and close the CF card slot cover.
IMPORTANT
• Observe the following precautions while the CFj or CFl access
indicator is illuminated in red. Failure to do so may result in permanent
CF card release
data loss.
button
- Do not disconnect the power source or turn off the camcorder.
- Do not open the cover of the CF card slot being accessed.
NOTES
• If you set the [J Other Functions]
[Off], the access indicators will not illuminate.
CF card slot status
Accessing CF card.
Recording/playback is possible and the CF card slot is selected
for recording/playback.
A CF card is not inserted, the CF card slot is not currently
selected, or the CF card is not being accessed.
[Media Access LED] function to