10-32
Vehicle Care
3. Remove the two screws that
secure the taillamp assembly.
4. Remove the taillamp assembly
by pulling it straight back.
5. Remove the bulb socket from
the taillamp assembly by turning
it counterclockwise.
6. Install a new bulb into the bulb
socket.
7. Install the bulb socket into the
taillamp assembly by turning it
clockwise.
8. Install the taillamp assembly and
tighten the two screws.
9. Close the two screw covers.
I n f o r ma t i o n P r o v i d e d b y :
License Plate Lamp
To replace the license plate
lamp bulb:
1. Remove the two screws from the
license plate lamp assembly.
2. Turn and pull the license plate
lamp assembly down.