Chevrolet 2013 Cruze Owner's Manual page 322

Hide thumbs Also See for 2013 Cruze:
Table of Contents

Advertisement

10-76
Vehicle Care
Front Jack Cover Shown, Rear
Jack Cover Similar
19. If this vehicle is the RS model,
snap the jack cover back into
place.
20. Remove the wheel blocks and
return them to their proper
storage location.
When reinstalling the wheel cover or
center cap on the full-size tire,
tighten all five plastic caps hand
snug with the aid of the wheel
wrench and tighten them with the
wheel wrench an additional
one-quarter of a turn.
Notice: Wheel covers will not fit
on the vehicle's compact spare.
If you try to put a wheel cover on
the compact spare, the cover or
the spare could be damaged.
Storing a Flat or Spare Tire
and Tools
WARNING
Storing a jack, a tire, or other
equipment in the passenger
compartment of the vehicle could
cause injury. In a sudden stop or
collision, loose equipment could
strike someone. Store all these in
the proper place.
Storing the Flat Tire and Tools
1. Replace the wheel wrench and
wheel blocks in the tool bag.
2. Remove the foam container from
the rear storage compartment.
I n f o r ma t i o n P r o v i d e d b y :
Coin/Pierce Jack Shown, Hex
Head Jack Similar
3. Place the flat tire in the storage
compartment with the valve
stem down.
4. Place the jack and jack handle
extension, if the vehicle has one,
in the foam container.
5. Place the foam container inside
the flat tire. Align the hole with
the stow rod.
6. Place the tool bag tether over
the stow rod and the tool bag
rear of the flat tire.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents