Step 2: Install Memory Modules - Gigabyte GA-8 SMML User Manual

GA-8SMML Motherboard

Step 2: Install memory modules

The motherboard has 3 dual in-line memory module (DIMM ) sockets. The BI OS will automatically
detects memory type and si z e. To install the memory module, just push it vertically into the DIMM Slot
.The DIMM module can only fit in one direction due to the two notch. Memory size can vary between
sockets.
1. The DIMM slot has two notch, so the
DIMM memory module can only fit in
one direction.
3. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Reverse the installation steps when you wish to remove the DIMM module.
? Please note that the DIMM module can only fit in one direction due to the one
notches. Wrong orientation will cause improper installation. Please change
the insert orientation.
SDRAM
2. Insert the DIMM memory module
vertically into the DIMM slot. Then
push it down.
12