Step 2: Install Memory Modules - Gigabyte GA-8IPXDR User Manual

GA-8IPXDR Motherboard

Step 2: Install memory modules

The motherboard has 6 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
Slot. The DIMM module can only fit in one direction due to the notch. Memory size can vary
between sockets.
M Please note that the DIMM module can only fit in one direction due to the one
notches. Wrong orientation will cause improper installation. Please change
the insert orientation.
DDR
1. The DIMM slot has a notch, so the DIMM
memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into the
DIMM slot. Then push it down.
3. Close the plastic clip at both edges of theDIMM slots
to lock the DIMM module.
Reverse the installation steps when you wish to
remove the DIMM module.
4. When installing the memoryin the DIMM module,
please insert them pair by pair.
5. The memory module does not support DDR X4, X8
type of mixture installation.
14