Table of Contents
Advertisement
Step 2: Install memory modules
The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot
.The DIMM module can only fit in one direction due to the notch. Memory size can vary between
sockets.
Total Memory Sizes With Unbuffered DDR DIMM
Devices used on DIMM
64 Mbit (2Mx8x4 banks)
64 Mbit (1Mx16x4 banks)
128 Mbit(4Mx8x4 banks)
128 Mbit(2Mx16x4 banks)
256 Mbit(8Mx8x4 banks)
256 Mbit(4Mx16x4 banks)
512 Mbit(16Mx8x4 banks)
512 Mbit(8Mx16x4 banks)
Please note that the DIMM module can only fit in one direction due to the one
notches. Wrong orientation will cause improper installation. Please change
the insert orientation.
GA-8SIMLFS Motherboard
This Manual: http://www.manuallib.com/file/2596474
1 DIMM x 64 / x 72
128 MBytes
32 MBytes
256 MBytes
64 MBytes
512 MBytes
128 MBytes
1 GBytes
256 MBytes
DDR
1. The DIMM slot has a notch, so the
2. Insert the DIMM memory module verticallyinto the
3. Close the plastic clip at both edges of theDIMM slots
2 DIMMs x 64 / x 72
256 MBytes
64 MBytes
512 MBytes
128 MBytes
1 GBytes
256 MBytes
2 GBytes
512 MBytes
DIMMmemory module can only fit in one direction.
DIMM slot. Then push it down.
to lock the DIMM module.
Reverse the installation steps when you wish to
remove the DIMM module.
- 10 -
Advertisement
Table of Contents
