How To Use; Using Your Machine - Hoover WH20400 Series User Manual

Using your machine:
WARNING
! !
Never leave the Steam Mop in one
spot on any surface for an extended
period of time with a damp or wet
Microfiber pad attached as this may
damage the floor surface.
When cleaning hard floors, your
Steam Mop should only be used
on tiles, linoleum, sealed hardwood
flooring, engineered hardwood,
laminate, vinyl, and sealed stone
floors. If used on waxed flooring, you
may experience loss of glossiness.
To reduce the risk of personal injury,
unplug the steam cleaner when
assembling the accessories.
Do not clean over floor
electrical outlets.
Do not use steam cleaner or press
the Steam Trigger without water in
the water tank.
• IMPORTANT •
Never use the Steam Mop without the
Microfiber pad properly attached to the
Mop Head.
1
Plug into outlet and slide switch
to ON (I=ON) position. The red
light will illuminate to show power
on. The blue light will illuminate
to show the steam mop is ready
to use. To turn OFF slide switch
to OFF (O=OFF) position.
2
To recline the steam mop
place your foot onto the
floor head and pull
handle backwards.
*
WH20400
*
WH20420
3
To steam your floors
WITHOUT solution select
the Steam Only setting.
To steam floors WITH
solution select tile, vinyl
or wood.
*Varies per model
10