2 - 26 MC67 Integrator Guide
Charge Only Cable
Figure 2-27
Auto Charge Cable
The Auto Charge cable plugs into a vehicle cigarette lighter and provide the MC67 with operating and charging
power.
Auto Charge Cable
Figure 2-28
Connecting to the MC67
If required, connect the cable power input connector to the Motorola approved power source.
1.
Slide the bottom of the MC67 into the connector cup end of the cable until the MC67 is firmly seated in the
2.
cup.
Slide the two locking tabs up until they both lock into position.
3.