Enabling Stp On The Switch - 3Com SuperStack II Switch 3000 10/100 User Manual

5-16 C 5: A
HAPTER DVANCED

Enabling STP on the Switch

To enable STP on your Switch:
From the VT100 Main Menu, select SWITCH MAN-
1
AGEMENT. The Switch Management screen is dis-
played.
In the Management Level field, choose Unit.
2
Choose the SETUP button. The Unit Setup screen is
3
displayed as shown in
In the Spanning Tree field, specify Enable.
4
Choose OK.
5
You cannot enable STP if you have set up resilient
links on any of the Switch ports, or if you are using
VLAN 16.
M
ANAGEMENT
Figure 5-13.
Figure 5-13 Unit Setup screen