3Com SuperStack II Switch 3000 10/100 User Manual page 50

4-8 C 4: M
HAPTER ANAGING THE
STP Use this button to display screens for managing
Spanning Tree Protocol (STP) information for the
level of management you have chosen (port or
VLAN). Refer to "Spanning Tree Protocol"
5-11.
STP is not supported over Asynchronous Transfer
Mode (ATM). If you specify that you want to
manage the Plug-in Module port and the Switch has
an ATM OC-3c Module installed, the STP button is
not displayed.
SERVER Use this button to display the VLAN Server
screen, used for entering the IP address and com-
munity string of a VLAN Server. For more informa-
tion about VLAN servers, refer to
(VLANs)" on page 5-1.
STATS Use this button to display statistics screens
for the level of management you have chosen (port
or unit). Refer to Chapter
Statistics".
SDB Use this button to display the Unit Database
View screen, which is used to manage the Switch
Database. Refer to "The Database View"
4-18.
RESILIENCE Use this button to display resilient link
management screens for the level of management
you have chosen (port or unit). Refer to
Up Resilient Links" on
You cannot set up resilient links if the Switch uses
Spanning Tree (STP). Consequently, the RESILIENCE
button is not displayed if STP is enabled.
S 3000 10/100
WITCH
on page
"Virtual LANs
6, "Status Monitoring and
on page
"Setting
page 4-20.
Figure 4-9 Switch Management screen for VLAN level
SETUP Use this button to display setup screens for
the level of management you have chosen (port,
unit or VLAN). For information about the Port
Setup and Unit Setup screens, Refer to
the Switch Ports" and
in this chapter. For information about the VLAN
Setup screen, refer to
Switch 3000 10/100"
"Setting Up
"Setting Up the Switch Unit"
"Setting up VLANs on the
on page 5-8.