Yamaha YHT-S300 Owner's Manual page 19
Yamaha home theater package
(subwoofer integrated receiver+ speaker)
Hide thumbs
Also See for YHT-S300:
- Service manual (103 pages) ,
- Quick reference manual (80 pages) ,
- Owner's manual (31 pages)
Advertisement
You can adjust the volume balance of the virtual
speakers
and subwoofer.
Parameter
"SW LEVEL":
Adjusts the output level of the
subwoofer
channel.
"CENTER
LEVEL":
Adjusts the output level of the
virtual center speaker channel.
"SUR. LEVEL":
Adjusts
the output level of the
surround/surround
back virtual speaker channels.
Adjustable
range
-6 to +6 (Default setting: 0)
• You can also adjust the output level of the subwoofer by
pressing SUBWOOFER
+/-.
• If surround mode is oft', the virtual center speaker and
virtual surround effects become invalid.
The system memorizes
the settings
assigned
to each input
source.
You can select this system (or a TV connected
to this
system via the HDMI OUT jack of this system) for
reproducing
sound signals input from the HDMI IN
jack in the setup menu.
Parameter
"HDMI AUDIO"
Adjustable
option (Default
setting:
"AMP")
"AMP":
Outputs HDMI sound signals from the
speakers connected
to this system.
"TV": Outputs HDMI sound signals from the speakers
of a TV connected
to this system. Sound output from
the speakers connected
to this system is muted.
You can adjust the balance of the high frequency
range (Treble)
and low frequency
range (Bass) of
sounds output from the front speakers to obtain
desired tone.
Parameter
"TONE BASS": Adjusts the balance of the low
frequency
range (Bass) of sounds output from the
speaker.
"TONE TREBLE":
Adjusts
the balance of the high
frequency
range (Treble)
of sounds output from the
speaker.
Adjustable
range
-6 to +6 (Default setting: 0)
• The volume
level will not change from pressing
VOLUME
+/- or MUTE
while output from the TV.
• You cannot change the audio output when "HDMI
CONTROL"
is set to "ON".
You can set whether to use the HDMI control
function.
Refer to P.21 for HDMI control function.
Parameter
"HDMI CONTROL"
Adjustable
option (Default
setting:
"OFF")
"ON": Activates
the HDMI control function.
"OFF": Deactivates
the HDMI control function.
Flat panel display TV images sometimes
lag behind
the sound. You can use this function to delay the
sound output to synchronize
it with the video image.
Parameter
"AUDIO
DELAY"
Adjustable
range (Default
setting:
"AUTO")
"AUTO",
0 to 240 ms (You can adjust the delay time
by the 10 ms.)
* "AUTO": If you operate HDMI connection to a TV with
the function to
automatically
adjusting the audio
delay,
you
can adjust the delay time automatically.
19 En
Advertisement
