In addition to enhancing the sound of a video source, like your TV, DVD, or VCR, the YHT-900 also superbly reproduces audio sources, such as a CD player or a cassette deck.
SET BEFORE POWER ON IMPEDANCE SELECTOR NOTE: For your convenience, the Yamaha HTR-5560 receiver is equipped with two switched AC outlets(1 00 W max.). If desired, use them to power on connected components (e.g.,CD player) each time the receiver is turned on. However, do not use them for components equipped with clocks (e.g.,VCR).
Page 5
SET BEFORE POWER ON IMPEDANCE SELECTOR NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5560 receiver. VIDEO S VIDEO VIDEO VCR 2...
Page 6
NOTE: Use the optical connection to enjoy 5.1 - channel surround sound found on DVDs recorded in the Dolby Digital or DTS Digital Surround format. OPTICAL DIGITAL Yamaha DV-C6480 DVD Player (Rear Panel) U I C K O N N E C T CENTER REAR CENTER –...
MIN. /SPEAKER SET BEFORE POWER ON IMPEDANCE SELECTOR NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5560 receiver. AUDIO VIDEO S VIDEO...
Page 8
6CH INPUT OUTPUT NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5560 receiver. ANT In Basic Cable (From Wall Jack) Premium Cable...
MUSIC Press the STANDBY/ON button to the on position. The indicator light will light up green. Then power on all other components. YHT-900 Q YST-SW205 S UBWOOFER 5. Play an audio source and adjust the HTR-5560's VOLUME control to a desired listening level.
Page 10
SELECT TEST RETURN DISC SKIP The YHT-900 Home Theater package includes a univer- sal remote control. It comes pre-programmed with factory codes to control your HTR-5560 receiver and most Yamaha audio components. To program other brands of components (i.e., TV, VCR, etc.) or if your...
Page 11
4. Using the keypad, enter the four-digit setup code. The indicator LED will flash twice after your entry. If the LED did not flash twice, repeat steps 3 and 4. YHT-900 Q EMOTE ONTROL ONTINUED 5. To verify the code works, aim the remote control at the VCR, press VCR 1, and then press AV POWER.