KTM 390 Duke EU 2013 Repair Manual page 91

16 ENGINE
–
Attach the outer clutch cable.
–
Mount and tighten nut
308306-11
–
Attach the inner clutch cable.
–
Secure the inner clutch cable with lock washer
308305-11
–
Mount and tighten nut
Guideline
Remaining nuts, chassis
–
Position the rubber cap.
–
Position the cable and secure with cable binders.
308304-11
–
Remove the oil filler plug
engine oil.
Engine oil
–
Mount and tighten the oil filler plug with the O-ring.
308328-10
Finishing work
–
Install the exhaust manifold. (
–
Reconnect the negative cable of the battery. (
–
Set the clock. (
–
Mount the seat. (
–
Mount the passenger seat. (
–
Take the motorcycle off of the rear wheel stand. (
–
Fill/bleed the cooling system. (
–
Fit the front spoiler. (
–
Take a short test ride.
–
Read out the fault memory using the KTM diagnostics tool.
–
Check the engine for leak tightness.
–
Check the engine oil level. (
–
Check the coolant level. (
.
cp
with the washers.
cr
M6
with the O-ring from the clutch cover and fill up with
cs
1.6 l (1.7 qt.) Engine oil (SAE 15W/50) (
p. 34)
p. 76)
p. 39)
p. 39)
p. 148)
p. 47)
p. 152)
p. 150)
.
cq
15 Nm
(11.1 lbf ft)
p. 186)
p. 62)
p. 9)
89