4-9-1. Firmware Upgrade
1. Create a new folder named "upgrade" in the USB flash drive root directory.
2. Create a sub-folder for each model under "upgrade" folder and copy each firmware.
"NVRX" for NVR: "main_NVxxxx_basic_*.*.*_201****"
•
3. Plug the USB flash drive into the USB connector on the front panel.
4. Navigate to CONFIG menu of SETUP.
5. Select SOFTWARE UPGRADE.
6. Follow the procedure shown in the three images below:
NOTICE
1.
If selecting REBOOT LATER, the upgraded software will not be applied until the
system reboots.
2.
If selecting REBOOT NOW when the USB flash drive is plugged, the following
message pops up. Remove the USB flash drive and select OK.
5. Live, Search and Playback
5-1. Live View
In the Live screen, video inputs from the cameras are displayed as they are configured in the
Display Setup screen. Various On-Screen Display (OSD) symbols, which indicate the status of
the NVRX, are described in Table 5.1.1.
43