Page 2
Quick Installation Guide Thank you for choosing the Genie NVRPRO Network Video Recorder. The following quick guide will help you to complete the installation and configuration of the NVR. Please read the following description carefully. Pre-installation Notice Make sure the following items are pre-prepared for installing your NVRPRO8.
Page 3
Make sure the display DPI setting is set to default at 96DPI To set the DPI value, right-click on desktop, choose “Settings” tab >> “Advanced” >> “General.” CD-ROM Drive Please read the operating instructions on the provided CD-ROM. ...
Page 4
Hardware Description Front View Rear View LED Indicators: LAN1, LAN2, eSATA, HDD1, HDD2, HDD3, HDD4, HDD5, HDD6, HDD7, HDD8 Power Button USB BACKUP Button - Auto Video Backup USB 3.0 x 1 (Support Auto Video Backup) HDD1 HDD2 HDD3 HDD4 HDD5...
Page 5
Hard Disk Installation Please follow the steps as illustrated below to install the hardware: Take the disk tray(s) out from the Connect the Ethernet cable to the Gigabit NVR. LAN port. Install a hard disk in each tray and ...
Page 6
Connection to NVRPRO8 NVR Insert the products CD-ROM in a PC to install NVR Search and NVR Player. Finally, you can start the Quick Configuration on a web page. Install NVR Search - used for finding a NVR in the network. ...
Page 7
Connect to NVRPRO8 1. Connect to NVRPRO8 After installing NVR Search and NVR Player you can connect to the monitoring page using one of the following two options: a) NVR Search If you click “Connect” or double click the selected NVR list, the IE browser pops up automatically.
Page 8
c) Enter a User Name and Password Log into the NVR with the default administrator account (user name: admin, password: admin). d) Install the ActiveX control in order to successfully view the interface of the NVRPRO8 from IE browser. ...
Page 9
start monitoring. For further Quick Configuration details please refer to the user manual. When the live view is displayed, you have successfully installed the NVRPRO8. Congratulations! 9
...