Genie NVRX4 User Manual page 34

Select the display language using the mouse or the control button on the
LANGUAGE
remote control. Once a language is selected, the display language changes.
Select the date display format using the mouse or the control button on the
DATE
remote control. Options are: MM/DD/YYYY, YYYY/MM/DD, DD/MM/YYYY,
FORMAT
YYYY-MM-DD, MM-DD-YYYY, DD-MM-YYYY.
Select the display date and time using the mouse or the control button on the
remote control, and press the OK button to set the present date and time.
SET
DATE&TIME
Select DAYLIGHT SAVING using the mouse or the control button on the
remote control, and select the appropriate daylight saving time zone. The
options are:
OFF: Daylight saving is turned off.
USA: Applies the USA daylight saving time.
EU: Applies the EU daylight saving time.
OTHERS: If the time zone is neither USA nor EU, set the date and time of
the daylight saving period.
CLIENT Enable/Disable remote access through the network.
ACCESS
NTP (Network Time Protocol) which synchronises the time of the computer
NTP
system over variable-latency data networks.
- Select the GMT AREA using the mouse or the control button.
- Set the time difference with the standard time using the mouse or
the button on the remote control.
- Select BEGIN or END using the control button and press the SEL
button.
Caution
- Do not set the start time to 23:00 for DLS.
- DLS cannot be applied if the date of BEGIN and END are the same.
34