Genie NVRX4 User Manual page 35

PRIMARY SNTP SERVER: Input the address of the primary NTP time-
server.
SECONDARY SNTP SERVER: Input the address of the secondary NTP time-
server.
TIME ZONE: NTP synchronises with GMT (Greenwich Mean Time) regardless
of geography; user must select time difference from GMT.
CONNECTON MODE: Select the NTP time-server connection mode from
TIME, INTERVAL, and ONCE.
CONNECTION PERIOD
TIME – Refresh the time at the designated time (e.g. 1AM).
-
INTERVAL – Every 1 hour ~ 24 hours.
-
ONCE – Synchronises time only once. NTP will not synchronise unless
-
the Connection Mode is changed.
NVR sends email Notification when the NTP server time is faster than
the system time and displays the message below.
"NTP server time is faster than the system time.
In this case, NTP server time is ignored to protect the user data.
User must set the time manually.
SYSTEM TIME: Mon Oct 10 13:46:49 2011
SERVER TIME: Mon Oct 10 13:33:12 2011
NVR ID: NVR
IP ADDRESS: 172.16.2.77"
35