Table of Contents
Advertisement
4-9. Setup - CONFIG Mode
In the SETUP menu, select the CONFIG tab. The configuration menu is displayed as pictured
below. Navigate through the menu items using the mouse, or the control button on the
remote control, to change the values.
Item
SAVE SETUP
TO A USB
LOAD SETUP
FROM A USB
LOAD
DEFAULT
LOAD
FACTORY
DEFAULT
SOFTWARE
UPGRADE
CONFIG Setup
Users can save the current configuration (Setting Values) of the NVRX to
the USB flash drive. Plug in a USB flash on the front panel and press the
button to start the saving process.
User can upload the configuration of the NVRX to another NVRX using the
USB Flash drive. Plug in the USB flash drive on the front panel and press
the button to start the loading process.
Press the button to reset the system to the default settings.
The
following
settings
Authentication, Security User P/W, Date format, DLS settings,
Network settings, HDD overwrite, Limit recording, HDD serial
number, and HDD ERROR time will not be included.
Press the button to reset the system to the factory default settings.
Upgrade software to the latest version.
After connecting USB flash drive to USB port on the NVRX, click SEARCH.
It automatically finds the upgrade file.
Description
Language,
NVR
42
ID,
Security
User
Advertisement
Table of Contents
