AUTO RESET
When auto reset is active, the following functions return to their program setting when the camera is
turned off. Auto reset is initially off. This function can be turned on in the custom 1 section of the
recording-mode menu (p. 38).
Flash mode (p. 28)
Drive mode (p. 40)
White balance (p. 43)
Camera sensitivity (p. 47)
Exposure compensation (p. 36)
Metering mode (p. 48)
Color mode (p. 49)
AF area (p. 25)
LCD monitor display (p. 30)
Camera Notes
The camera will reset if the battery is removed for an extended period. An internal battery pro-
tects the clock, calendar, and camera settings for more than 24 hours if the camera is used for
at least 5 minutes before the battery is removed.
COLOR MODE
The color mode controls whether a still image is color or black
and white. This must be set before the image is recorded. The
color mode is set in the custom 2 section of the recording mode
menu (p. 38). The live image on the monitors will reflect the
selected color mode. The color option uses no monitor indicator
when active. The color mode has no effect on image file size.
The black & white mode produces neutral monochrome images.
Sepia creates warm-tone monochrome images.
–
Auto
–
Single-frame advance
–
Auto
–
Auto
–
0.0 Ev
–
Multi segment
–
Color
–
Wide focus frame
–
Full
The flash mode is reset to auto-
flash with red eye reduction if
autoflash with red eye reduction
was last set, if not the mode will
be reset to autoflash. See page
28 for information on flash
modes.
Black & White
Sepia
49