Getting Up And Running; Inserting The Lithium-Ion Battery - Minolta DiMAGE Xt Instruction Manual

GETTING UP AND RUNNING

INSERTING THE LITHIUM-ION BATTERY

This digital camera uses one NP-200 lithium-ion battery. Before using the battery, read the
safety warnings on pages 3 and 4 of this manual. When replacing the battery, the camera
should be turned off.
Slide the battery-chamber door toward the front of the camera to release
the safety catch (1). Open the door.
1
Move the battery latch towards the back of the camera to insert
the battery (2). Slide the battery into the battery chamber with the
battery terminals first until it is caught by the latch.
2
To remove the battery, move the latch towards the back of the
camera until the battery is released (3). Pull the battery out of
the chamber.
3
Close the battery-chamber door (4) and slide it toward the
back of the camera to engage the safety catch.
After installing the battery, the set-time/date message may
appear on the monitor. The clock and calendar is set in the
custom 2 section of the setup menu (p. 20). An internal bat-
tery protects the clock, calender, and memory settings for
4
more than 24 hours if the camera is used for at least 5 min-
utes before removing the battery.
14 GETTING UP AND RUNNING