Auto Reset - Minolta Dimage X20 Instruction Manual

AUTO RESET

When auto reset is active, the following functions return to their program setting when the
camera is turned off. Auto reset is initially on. This function can be turned off in the section
1 of the recording-mode menu (p. 48).
Flash mode (p. 36)
Drive mode (p. 38)
White balance (p. 42)
Camera sensitivity (p. 51)
Exposure compensation (p. 45)
LCD monitor display (p. 29)
Toning (p. 46)
Portrait (p. 47)
Camera Notes
The camera will reset if the battery is removed for an extended period. An internal battery pro-
tects the clock, calendar, and camera settings for more than 24 hours if the camera is used for at
least 5 minutes before the battery is removed.
52 R -
ECORDING ADVANCED OPERATION
– Auto
– Single-frame advance
– Auto
– Auto
– 0.0 Ev
– Full
– Color
– Off
The flash mode is reset to
autoflash with red
reduction if autoflash with
red eye reduction was last
set, if not the mode will be
reset to autoflash. See page
36 for information on flash
modes.
eye