Minolta DiMAGE Xt Instruction Manual page 95

Connect the camera to the printer using the camera's USB cable. The larger plug on
the cable is connected to the printer. Slide open the USB-port cover and insert the
smaller plug of the cable into the camera. Turn the camera on. The USB Direct Print
screen will be displayed.
Number of prints in the print run.
:move :sel.
The display button switches between the
single frame and index playback formats.
Print file?
Number of prints: 7
Yes No
Printing finished.
OK
Strike through indicates unprintable file type.
Number of copies of the displayed image.
:print
The number of prints in the print run are displayed on the LCD moni-
tor. Use the left/right keys to highlight "Yes," and press the center of
the controller to start printing.
Once printing begins, the operation can be canceled by pressing the
center of the controller. The printing finished message will indicate
the end of the operation; turn the camera off to end the routine.
Use the left/right keys of the controller to
display the image to be printed.
Press the up key to select the number of
copies to be printed. A maximum of nine
copies can be selected. To deselect an
image for printing, press the down key
until the number of copies reaches zero.
Repeat the previous steps until all the
images to be printed are selected. Press
the central button of the controller to
begin the printing routine.
95