Setting The Date And Time - Minolta DiMAGE Xi Instruction Manual

G
ETTING UP AND RUNNING

Setting the date and time

After initially inserting a memory card and charging the battery, the camera's clock and
calendar must be set. When images are recorded, the image data is saved with the
date and time of recording. Depending on the region, the menu language may also
have to be set. To change the language, refer to page 69.
1
4
2
3 5
18
Turn the camera on by pressing the
main switch near the shutter-release
button (1).
Slide the mode switch to the playback
position (2).
The date and time can be set on the
playback menu. Navigating the menu
is simple. The menu button (3) turns
the menu on and off. The zoom lever
and left and right keys (4) control the
cursor and change settings on the
menu. The enter button (5) selects
menu options and sets adjustments.
Basic Setup 1 Setup 2
LCD brightness -
Power off 3 min.
Audio signals On
Date/Time set -
Date format YYYY/MM/DD
Playback menu: setup 1 section
Date/Time set
Enter
Date/Time setting screen
Press the menu button to active the
playback menu.
Use the right key to highlight the
setup 1 tab at the top of the menu.
Use the zoom lever to highlight the
date/time-set menu option.
Press the right key. "Enter" will
appear on the right side of the
menu.
Press the enter button to display the date/time
setting screen.
Use the left and right keys to select the
item to be changed. Use the zoom lever
to adjust the item.
Press the enter button to set the clock and cal-
endar. The playback menu will be displayed.
Press the menu button to close the playback
menu.
19