D
-
ATA
TRANSFER MODE
Connecting to Mac OS 8.6
To access this camera with a computer with Mac OS 8.6, the USB storage support 1.3.5.smi must be
installed first. This software is supplied by Apple Computer, Inc. free of charge. It can be downloaded
from the Apple web site at http://www.apple.com.
To download and install this software, follow the instruction
on the Apple web site. Always read the attached terms and
conditions before installing any new software.
QuickTime system requirements
QuickTime 5.0 is used for viewing movie clips
IBM PC / AT Compatible
and playing audio files. To install QuickTime,
Pentium-based computer
follow the instructions in the installer. Macintosh
users can download the latest version of
Windows 95, 98, 98SE, NT, Me,
QuickTime free of charge from the Apple
or 2000 Professional.
Computer web site: http://www.apple.com.
32MB or more of RAM
Sound Blaster or compatible sound card
DirectX 3.0 or later recommended
Auto power off - data-transfer mode
If the camera does not receive a read or write command within thirty minutes, it will shut down to
save power. When the camera shuts down, an unsafe-removal-of-device warning may appear on the
computer monitor. Click "OK." Neither the camera or computer will be damaged in this operation.
Unplug the USB cable and turn off the camera. Remake the USB connection by reattaching the
cable and turning the camera on.
70