Flash Modes - Minolta DiMAGE X Instruction Manual

R
ECORDING MODE

Flash modes

The flash can be used when taking still images. To set the flash
mode, simply press the flash mode button (1) on the back of the cam-
era until the desired mode is displayed. The active flash mode is dis-
played in the top left corner of the LCD monitor. When the camera is
turned off, the flash mode is reset to autoflash with red-eye reduction
if autoflash with red-eye reduction or night portrait was last set, if not
the mode will be reset to autoflash.
The flash modes are displayed in the following order:
Autoflash
Autoflash - the flash fires automatically in low-light and backlit conditions.
Red-eye reduction - the flash fires multiple bursts before the main flash burst to reduce red-eye; an
effect caused by light reflected from the retina. Use in low-light conditions when taking photographs
of people or animals. The pre-flashes contract the pupils of the subject's eyes.
Fill-flash - the flash fires with each exposure
regardless of the amount of ambient light. Fill-flash
can be used to reduce harsh shadows caused by
strong direct light or sunshine.
26
Autoflash with
red-eye reduction
Flash
Fill-flash
cancel
1
Night
portrait