Installing And Removing A Memory Card - Minolta Dimage X20 Instruction Manual

INSTALLING AND REMOVING A MEMORY CARD

Always turn off the camera and confirm the flash/access lamp is not orange
and blinking before changing the memory card, otherwise the card may be
damaged, and data lost.
An SD (Secure Digital) Memory card or MultiMediaCard must be inserted for the camera to operate.
If a card has not been inserted, a no-card warning will appear on the LCD monitor; the shutter can
still be released and a single image can be captured (p. 58).
Insert the memory card all the way into the card slot and then
release. The card should catch in the slot.
Insert the card so the face is toward the front of the camera.
Always push the card in straight, never at an angle. Never
force the card. If the card does not fit, check that it is orientat-
ed correctly.
To eject a memory card, press the card into the slot and
release. The card can now be pulled out.
18 G
ETTING UP AND RUNNING